It worked for a few hours and produced about 100L before it stopped working. after sales support suggested that the RO element was blocked and to get a prefilter but the RO element was not blocked. It is missing critical components needed for it to operate once the RO element is fully saturated that can take a day. The RO input and concentrate ports are also connected backwards. There is a single 300cc flow limitter on the input of the RO element. RO needs about about a 1:5 ratio of permeate to concentrate for best performance. This would leave about 50cc of permeate flow but as the RO element is rated for 300cc/min of permeate flow not raw input -and by extension, 300ccx5=1500cc of concentrate flow, placing the 300cc limitter on the input leads to an initial drip followed by all the water exiting via the concentrate port and no permeate production. problem is that you also need a 350kpa/50psi pressure limiter, an adjustable flow limiter valve and probably an extra UF filter to protect the RO element and to throw away the included flow limiter or put it on the permeate port. put the adjustable limiter valve on the concentrate port. adjust the concentrate limit valve until you're happy with the flow ratio and tds of the permeate. Or just build your own unit from chinese parts. the same components for an 800gpd setup cost about the same as this kit. picture is what it should look like once you've fixed it and installed the critical components.
No filter fit well come on time very happy thank you
Got two years supply in price of one. Great product and price.
That service is good. The field is at the moment are pretty good. We will keep in contact.
Good quality RO water filter. Easy to install. Good after sales support from local Australian seller.